The 4” of HardCORE Cantilever Wheel Assembly is another SHUT IT smartass design. With this assembly a wheel can be installed on a rail rather than on a v-track on the ground surface. These installations are ideal when installing a track on the ground is not feasible. Whether it it on a full cantilever gate system or the SHUT IT designed semi and quarter cantilever system, the HardCORE Cantilever Wheel Assembly is a perfect solution for the odd job.
- Two Maintenance Free Sealed Bearing (no greasing)
- Adjustable Plates For Perfect Installations
- Only 1 1/8” thick to reduce friction and debris issues
- Limited Lifetime Warranty (5 Years on Bearings)
- Zinc Plated
- Maximum Load Rating: 3000 lbs
- Maximum Gate Weight: Up To 1000 lbs
- Minimum 1045 Cold rolled steel (30RC rating)
- Weld-on Installation
WARRANTY AND RATING INFORMATION
PRODUCT: The 4” of HardCORE Series V-Groove Wheels (CI2240, CI2415-CI2425, CI2515-CI2525)
SHUT IT Gate Hardware is proud to offer the best warranty in the industry for all of its wheel, hinge and guide products. For The 4” of HardCORE Series V-Groove Wheels (CI2340, CI2415-CI2425, CI2515-CI2525) SHUT IT! Gate Hardware guarantees all machined components (wheel, spacers and plates) for the life of the gate on which it is originally installed. SHUT IT Gate Hardware also guarantees on all remaining components (including bearings) for a period of five (5) years from date of original installation.
SHUT IT Gate Hardware products are guaranteed to be free of defects in both workmanship and materials. SHUT IT Gate Hardware’s liability under all warranties, express or implied, shall be limited to replacement of defective goods. Failures due to normal use and weather wear as well as defects caused by acts of God are not covered under this warranty. Defective goods must be returned to our headquarters in Tucson, Arizona, unless otherwise agreed upon by SHUT IT Gate Hardware’s returns department. As standard in the industry, Counsel’s warranty is based on proper installation, including adherence to our weight capacities. Additionally, any modification of products or improper installation will void the warranty.
ALL SHUT IT GATE HARDWARE PRODUCT RATINGS ARE INTENDED FOR INFORMATIONAL PURPOSE ONLY AND ARE NOT EXPRESSED OR IMPLIED GUARANTEES.
The 4” of HardCORE Series V-Groove Wheels (CI2340, CI2415-CI2425, CI2515-CI2525) has been given a rating of 3,000 lbs per wheel. Our ratings are principally based on the Basic Dynamic Load ratings provided and guaranteed by our bearing manufacturers. For The 4” of HardCORE Series V-Groove Wheels (CI2340, CI2415-CI2425, CI2515-CI2525) each bearing has a BDL rating in excess of 1,000 lbs and each wheel utilizes two bearings for a load capacity in excess of 2,000 lbs. After we initially determined the BDL of our products we spent nearly 2 years testing the hinges in actual field installations to determine what we believe is a properly conservative capacity for each product.
SHUT IT Gate Hardware
4500 E Speedway Blvd., Suite 48
Tucson, Arizona 85712